Unix Man page/Perldoc/Info page, English-Chinese Dictionary,
Chinese-English Dictionary
Unix Man page/Perldoc/Info page, English-Chinese Dictionary,
Chinese-English Dictionary
PERLDL(1p) User Contributed Perl Documentation PERLDL(1p) NAME perldl - Simple shell for PDL SYNOPSIS Use PDL interactively: %> perldl perldl> $a=sequence(10) # or any other perl or PDL command %> pdl perldl> print "Hello, world!\n"; Run a script: %> perldl - pdlscript #!/usr/bin/pdl DESCRIPTION The program perldl is a simple shell (written in perl) for interactive use of PDL. It consists of a command-line interface that supports immediate interpretation of perl commands and expressions. Perl expressions, including PDL constructs, can be entered directly at the keyboard and are compiled and executed immediately. The syntax is not exactly identical to Perl, in that under most circumstances ending a line causes immediate execution of the command entered so far (no trailing ';' is required). The synonym pdl is a compiled executable that is useful as a script interpreter using UNIX shebang ("#!") syntax. This is useful for gen- erating and re-executing command-journal files from perldl. The perldl shell runs an initial startup file ("~/.perldlrc") that can be used to pre-load perl modules or configure the global perl environ- ment. It features a path mechanism for autoloading perl subroutines. There is a command-history mechanism, and several other useful features such as command preprocessing, shortcuts for commonly used commands such as "print", and the ability to execute arbitrary code whenever a prompt is printed. Depending on your configuration settings, perldl can be set to honor or ignore the ^D (end-of-file) character when sent from a terminal, or to attempt to do the Right Thing when a block construct spanning multiple lines is encountered. perldl and pdl support several command-line options, which are dis- cussed near the end of this document. Reference manual & online help The PDL reference manual and online help are available from within perldl, using the help and apropos commands (which may also be abbrevi- ated ? and ??.) The help command alone prints a summary of help syn- tax, and help <module-name> will print POD documentation from the mod- ule you mention (POD is the Perl format for embedding documentation in your perl code; see perlpod for details). If you include POD documentation in your autoload subroutines (see path mechanism below), then both help and apropos will find it and be able to format and display it on demand. History mechanism If you have the perl modules ReadLines and ReadKeys installed, then perldl supports a history and line-editing mechanism using editing keys similar to emacs(1). The last 50 commands are always stored in the file .perldl_hist in your home directory between sessions. The command "l [number]" shows you the last "number" commands you typed where "number" defaults to 20. e.g.: % perldl ReadLines enabled perldl> $a = rfits "foo.fits" BITPIX = -32 size = 88504 pixels Reading 354016 bytes BSCALE = && BZERO = perldl> imag log($a+400) Displaying 299 x 296 image from 4.6939525604248 to 9.67116928100586 ... Command execution If you enter a simple command at the perldl command line, it is immedi- ately executed in a Perl eval(). The environment is almost identical to that within a perl script, with some important exceptions: * $_ is not preserved across lines $_ is used to hold the command line for initial processing, so at the beginning of processing of each command line, $_ contains the command itself. Use variables other than $_ to store values across lines. * Scope is not preserved across lines Each command line is executed in a separate "eval" block within perl, so scoping commands such as "my" and "local" may not perform exactly as expected -- in particular, if you declare a variable with "my", it is local to the particular command line on which you typed the "my" command, which means that it will evaporate before the next prompt is printed. (You can use "my" variables in a multi-line block or to isolate values within a single command line, of course). * Execution is immediate Under most circumstances, as soon as you end a line of input the line is parsed and executed. This breaks Perl's normal dependence on semicolons as command delimiters. For example, the two-line expression print "Hello ", "world"; prints the phrase "Hello world" in Perl, but (under most circum- stances) "Hello " in perldl. * Multi-line execution In multiline mode (which is enabled by default, see Shell variables, below), perldl searches for searches for block-like constructs with curly braces, parentheses, quotes, and related delimiters. If you leave such a construct open, perldl accepts more lines of input until you close the construct or explictly end the multi-line expression with ^D. Following the example above, the phrase { print "Hello ", "world"; } will print "Hello world" from either Perl or (in multi-line mode) perldl. Warning: The multi-line parsing uses Damian Conway's Text::Balanced module, which contains some flaws -- so it can be fooled by quote- like operators such as "q/.../", included POD documentation, multi- line "<<" quotes, and some particularly bizarre-but-valid "m/.../" matches and "s/.../.../" substitutions. In such cases, use ^D to close out the multi-line construct and force compilation-and-execu- tion. If you want to preserve this behavior in a script (for example to replay a command journal file; see below on how to create one), you can use pdl instead of perl as the interpreter in the script's initial she- bang line. Terminating "perldl" A "perldl" session can be terminated with any of the commands "quit", "exit" or the shorthands "x" or "q". If EOF handling is switched on (the default) you can also type ^D at the command prompt. If the command input is NOT a terminal (for example if you are running from a command journal file), then EOF will always terminate perldl. Terminating commands (Ctrl-C handling) Commands executed within "perldl" can be terminated prematurely using "Ctrl-C" (or whichever key sequence sends an INT signal to the process on your terminal). Provided your PDL code does not ignore "sigint"s this should throw you back at the "perldl" command prompt: perldl> $result = start_lengthy_computation() <Ctrl-C> Ctrl-C detected perldl> Shortcuts and aliases o The shell aliases "p" to be a convenient short form of "print", e.g. perldl> p ones 5,3 [ [1 1 1 1 1] [1 1 1 1 1] [1 1 1 1 1] ] o "q" and "x" are short-hand for "quit". o "l" lists the history buffer perldl> l # list last 20 commands perldl> l 40 # list last 40 commands o "?" is an alias for help perldl> ? wpic o "??" is an alias for apropos perldl> ?? PDL::Doc o help, apropos, usage and sig: all words after these commands are used verbatim and not evaluated by perl. So you can write, e.g., help help instead of help 'help' Command-line options perldl and pdl support several command-line options to adjust the behavior of the session. Most of them are equivalent to commands that can be entered at the perldl> prompt. They are: -tk Load Tk when starting the shell (the perl Tk module, which is available from CPAN must be installed). This enables readline event loop processing. -f file Loads the file before processing any user input. Any errors during the execution of the file are fatal. -w Runs with warning messages (i.e. the normal perl "-w" warnings) turned-on. -M module Loads the module before processing any user input. Compare corre- sponding "perl" switch. -m module Unloads the module before processing any user input. -I directory Adds directory to the include path. (i.e. the @INC array) Compare corresponding "perl" switch. -V Prints a summary of PDL config. This information should be included with any PDL bug report. Compare corresponding "perl" switch. The startup file ~/.perldlrc If the file ~/.perldlrc is found it is sourced at start-up to load default modules, set shell variables, etc. If it is NOT found the dis- tribution file PDL/default.perldlrc is read instead. This loads various modules considered useful by default, and which ensure compatibility with v1.11. If you don't like this and want a more streamlined set of your own favourite modules simple create your own ~/.perldlrc To set even more local defaults the file local.perldlrc (in the cur- rent directory) is sourced if found. This lets you load modules and define subroutines for the project in the current directory. The name is chosen specfically because it was found hidden files were NOT wanted in these circumstances. The startup file should normally include "use PDL::AutoLoader;", as many of the nicer interactive features won't work without it. Shell variables Shell variables: (Note: if you don't like the defaults change them in ~/.perldlrc) o $PERLDL::ESCAPE - default value '#' Any line starting with this character is treated as a shell escape. The default value is chosen because it escapes the code from the standard perl interpreter. o $PERLDL::PAGER - default value "more" External program to filter the output of commands. Using "more" prints output one screenful at a time. On Unix, setting page(1) and $PERLDL::PAGER to "tee -a outfile" will keep a record of the output generated by subsequent perldl commands (without paging). o $PERLDL::PROMPT - default value 'perldl> ' Enough said But can also be set to a subroutine reference, e.g. $PERLDL::PROMPT = sub {join(':',(gmtime)[2,1,0]).'> '} puts the current time into the prompt. o $PERLDL::MULTI - default value 1 If this is set to a true value, then perldl will parse multi-line perl blocks: your input will not be executed until you finish a line with no outstanding group operators (such as quotes, blocks, parenthesis, or brackets) still active. Continuation lines have a different prompt that shows you what delimiters are still active. Note that this is not (yet!) a complete perl parser. In particu- lar, Text::Balanced appears to be able to ignore quoting operatores like "q/ ... /" within a line, but not to be able to extend them across lines. Likewise, there is no support for the '<<' operator. Multiline conventional strings and {}, [], and () groupings are well supported. o $PERLDL::NO_EOF - default value 0 Protects against accidental use of "^D" from the terminal. If this is set to a true value, then you can't accidentally exit perldl by typing "^D". If you set it to a value larger than 1 (and PERLDL::MULTI is set), then you can't use "^D" to exit multiline commands either. If you're piping commands in from a file or pipe, this variable has no effect. o $HOME The user's home directory o $PERLDL::TERM This is the Term::ReadLine object associated with the perldl shell. It can be used by routines called from perldl if your command is interactive. Executing scripts from the "perldl" prompt A useful idiom for developing perldl scripts or editing functions on- line is perldl> # emacs script & -- add perldl code to script and save the file perldl> do 'script' -- substitute your favourite window-based editor for 'emacs' (you may also need to change the '&' on non-Unix systems). Running "do 'script'" again updates any variables and function defini- tions from the current version of 'script'. Executing perldl scripts from the command line PDL scripts are just perl scripts that happen to use PDL (and possibly PDL::NiceSlice). But for the truly lazy, perldl can be invokes as a script interpreter. Because perldl is itself an interpreted perl script, most unices won't allow you to say "#!/usr/bin/perldl" at the top of your script. Instead, say "#!/usr/bin/pdl" and your script will be executed exactly as if you typed it, line-by-line, into the perldl shell. Command preprocessing NOTE: This feature is used by default by PDL::NiceSlice. See below for more about slicing at the "perldl" prompt In some cases, it is convenient to process commands before they are sent to perl for execution. For example, this is the case where the shell is being presented to people unfamiliar with perl but who wish to take advantage of commands added locally (eg by automatically quoting arguments to certain commands). *NOTE*: The preprocessing interface has changed from earlier versions! The old way using $PERLDL::PREPROCESS will still work but is strongly deprecated and might go away in the future. You can enable preprocessing by registering a filter with the "pre- proc_add" function. "preproc_add" takes one argument which is the fil- ter to be installed. A filter is a Perl code reference (usually set in a local configuration file) that will be called, with the current com- mand string as argument, just prior to the string being executed by the shell. The modified string should be returned. Note that you can make "perldl" completely unusable if you fail to return the modified string; quitting is then your only option. Filters can be removed from the preprocessing pipeline by calling "pre- proc_del" with the filter to be removed as argument. To find out if a filter is currently installed in the preprocessing pipeline use "pre- proc_registered": perldl> preproc_add $myfilter unless preproc_registered $myfilter; Previous versions of "perldl" used the variable $PERLDL::PREPROCESS. This will still work but should be avoided. Please change your scripts to use the "preproc_add" etc functions. The following code would check for a call to function 'mysub' and bracket arguments with qw. $filter = preproc_add sub { my $str = shift; $str =~ s/^\s+//; # Strip leading space if ($str =~ /^mysub/) { my ($command, $arguments) = split(/\s+/,$str, 2); $str = "$command qw( $arguments )" if (defined $arguments && $arguments !~ /^qw/); }; # Return the input string, modified as required return $str; }; This would convert: perldl> mysub arg1 arg2 to perldl> mysub qw( arg1 arg2 ) which Perl will understand as a list. Obviously, a little more effort is required to check for cases where the caller has supplied a normal list (and so does not require automatic quoting) or variable interpola- tion is required. You can remove this preprocessor using the "preproc_del" function which takes one argument (the filter to be removed, it must be the same coderef that was returned from a previous "preproc_add" call): perldl> preproc_del $filter; An example of actual usage can be found in the "perldl" script. Look at the function "trans" to see how the niceslicing preprocessor is enabled/disabled. "perldl" and PDL::NiceSlice PDL::NiceSlice introduces a more convenient slicing syntax for piddles. In current versions of "perldl" niceslicing is enabled by default (if the required CPAN modules are installed on your machine). At startup "perldl" will let you know if niceslicing is enabled. The startup message will contain info to this end, something like this: perlDL shell v1.XX PDL comes with ABSOLUTELY NO WARRANTY. For details, see the file 'COPYING' in the PDL distribution. This is free software and you are welcome to redistribute it under certain conditions, see the same file for details. ReadLines, NiceSlice enabled Reading /home/csoelle/.perldlrc... Type 'demo' for online demos Loaded PDL v2.XX When you get such a message that indicates "NiceSlice" is enabled you can use the enhanced slicing syntax: perldl> $a = sequence 10; perldl> p $a(3:8:2) For details consult PDL::NiceSlice. PDL::NiceSlice installs a filter in the preprocessing pipeline (see above) to enable the enhanced slicing syntax. You can use a few com- mands in the "perldl" shell to switch this preprocessing on or off and also explicitly check the substitutions that the NiceSlice filter makes. You can switch the PDL::NiceSlice filter on and off by typing perldl> trans # switch niceslicing on and perldl> notrans # switch niceslicing off respectively. The filter is on by default. To see how your commands are translated switch reporting on: perldl> report 1; perldl> p $a(3:8:2) processed p $a->nslice([3,8,2]) [3 5 7] Similarly, switch reporting off as needed perldl> report 0; perldl> p $a(3:8:2) [3 5 7] Reporting is off by default. Automatically execute your own hooks The variable @PERLDL::AUTO is a simple list of perl code strings and/or code reference. It is used to define code to be executed automatically every time the user enters a new line. A simple example would be to print the time of each command: perldl> push @PERLDL::AUTO,'print scalar(gmtime),"\n"' perldl> print zeroes(3,3) Sun May 3 04:49:05 1998 [ [0 0 0] [0 0 0] [0 0 0] ] perldl> print "Boo" Sun May 3 04:49:18 1998 Boo perldl> Or to make sure any changes in the file 'local.perldlrc' are always picked up :- perldl> push @PERLDL::AUTO,"do 'local.perldlrc'" This code can of course be put *in* 'local.perldlrc', but be careful :-) [Hint: add "unless ($started++)" to above to ensure it only gets done once!] Another example application is as a hook for Autoloaders (e.g. PDL::AutoLoader) to add code too which allows them to automatically re- scan their files for changes. This is extremely convenient at the interactive command line. Since this hook is only in the shell it imposes no inefficiency on PDL scripts. Finally note this is a very powerful facility - which means it should be used with caution! perl v5.8.8 2007-01-14 PERLDL(1p) |